TWS 100 Plus
Design and functionality for changing rooms and restroom stalls
Model overview
TYPE A
A1 Soil air
A2 Soil air
A3 Soil air
A4 Soil air
A5 Soil air
A6 Soil air
A7 Soil air
A8 Floor air A1 floor level
A1 floor-to-ceiling
A2 floor-to-ceiling
A3 floor-to-ceiling
A4 floor-to-ceiling
A5 floor-to-ceiling
A6 floor-to-ceiling
A7 floor-to-ceiling
A8 floor-to-ceiling
Type B
B1 Soil air
B1 floor-to-ceiling
B2 floor-to-ceiling
Type C
C1 Soil air
C2 Soil air
C3 Soil air
C1 floor to ceiling
C2 floor-to-ceiling
C3 floor-to-ceiling
Type D
D1
D2 Soil air
Advantages at a glance
- Practical: integrated spring for self-closing doors
- Aesthetics: flush-mounted point holders are delicate and also easy to clean
- Easy to install and flexible: the various cubicle models can be realized with just a few hardware parts
- Fitting surfaces and privacy seal (on the inside of the cubicle) in matt chrome
- High stability
- Variable options for floor clearance and overall height
- Floor clearance from 65 to 150 mm, base and upper stiffener offset 150 mm inwards
- Variant without floor clearance with U-profile on the floor (door 10 mm clearance)
- Extension options such as urinal partitions and accessories such as toilet roll holder, spare toilet roll holder, toilet brush holder (each bright chrome-plated) and coat hooks with stop buffer (matt chrome) available
- Creative freedom thanks to ceramic screen printing (single or multi-colored), also with individual motifs
Technical details
Technical design
- 10 mm toughened safety glass made of float glass with full-surface high opacity screen printing to RAL on the inside of the cubicle, polished edges
- Matt chrome fitting surface (similar to E6/EV1)
- Exterior flush-mounted point holders Ø 35 mm horizontally on one axis
- WC rotary lock with locking from the inside, field of vision red/green on the inside and outside, Emergency opening from outside
- Doors with self-closing via spring in hinge
- Doors open inwards, width from 600-900 mm possible
- Privacy seals on door gap on inside
- Base and upper bracing offset 150 mm inwards
- Base Ø 25 mm with base plate Ø 70 mm, height-adjustable +/- 7 mm
- Upper bracing with square tube 25 mm
Standard dimensions
- System height incl. upper bracing 2,100 mm
- System height 2,050 mm
- Glass height 1,900 mm
- Floor clearance 150 mm
Variable options at no extra cost
- Doors open outwards, max. opening angle 100° (opening angle 100°) Opening angle 100°
(opening restriction required)
- Floor clearance 65-150 mm possible
- Without floor clearance with aluminum U-profile 20 x 20 mm in matt chrome on the floor, door clearance 10 mm
- Base and top stiffener can be offset inwards by up to 250 mm
Variable options with surcharge
- ESG 10 mm made of white glass with light colors, motifs or logo
- VSG 11 mm made of ESG 6 mm (float glass) with screen print facing the laminate + ESG 5 mm made of float glass with flush-mounted point holder
- VSG 11 mm made of ESG 6 mm (white glass) with screen print facing the laminate + ESG 5 mm made of white glass with flush-mounted point holder
- System height up to 2.500 mm
- Doors open outwards, max. 100° with overhead door closer
(opening limiter)
- Glass with SpriMedical® antibacterial glass coating on the inside
- Holes for toilet roll holder for central cubicle
- Clothes hooks with stop buffer (see folding page)
Color overview ceramic screen printing
RAL 9010
RAL 9016
RAL 9005
RAL 9011
RAL 9017
MORE COLORS...
... can be ordered freely according to the RAL CLASSIC color system. Sampling is mandatory (subject to a charge).
Coat hooks with bumpers
The coat hook with bumper is available as a practical accessory. Thanks to the hanging pin, it can be used in a variety of ways, for example as a bag holder or jacket hanger.
The coat hook can be mounted in either one or both directions and can also be glued or attached to a tiled wall. The numerous customization options make the product an indispensable assistant.
