General questions
Mon-Fri 08:00-18:00
Sat 09:00-12:00
Spare parts such as seals, profiles and other items can be obtained from your local sales representative or via the order form on the website.
Click here for the care tips for our glass products:
No, the installation price is charged separately.
A measurement is the measurement and recording of a room in order to adapt the product precisely to your needs.
ESG is a single-pane safety glass that builds up a strong internal tension through heat treatment. This gives it increased impact and shock resistance as well as increased flexural strength. If the pane breaks, the entire pane disintegrates into a network of fragments, most of which are blunt-edged and loosely connected to each other.
VSG, or laminated safety glass, consists of at least two panes of glass that are permanently bonded by means of a tough, elastic and tear-resistant PVB film (polyvinyl butyral film) or EVA film (ethylene vinyl acetate film). In the event of breakage, the fragments adhere to the film and reduce the risk of injury.
RAL colors are standardized colors to obtain color-fast prints. To select the right color, there are color fans with a corresponding number that is assigned to a specific color.
With ceramic screen printing, the ceramic color is printed onto the glass through a fine screen. A wide range of RAL colors are available, which can be applied to the entire surface of the glass in one or two colors.
Baked into the glass at high temperatures, they are robust, easy to clean and UV-resistant.
In the ceramic digital printing process, the printed image is transferred directly from the computer to the printing machine and onto the glass. The process applies up to five different colors (red, green, blue, yellow and black) simultaneously and enables a finer surface with a noticeably subtle texture. The color impression is almost identical from both sides.
With UV digital printing, the printed image is printed onto the glass surface in the same way as with ceramic digital printing. The slightly satin appearance of the dried ink ensures brilliant colors. UV curing after printing increases the strength of the print.
Find out more about the different printing processes. We will be happy to advise you on which print is best suited to your product.
The heat soak test is a hot storage test for toughened safety glass (TSG). To avoid spontaneous breakage, it is advisable to carry out this test. The toughened glass is heated to 280°C and the temperature is maintained in the heat-soak oven for at least 4 hours.
QUESTIONS ABOUT THE SHOWER WORLD
Please place your order in writing using the order form, by e-mail or by fax.
Spare parts such as seals, profiles and other items can be obtained from your local sales representative or via the order form on the website.
Alternatively, you can also obtain the products on site in our sanitary building. Please ring the bell at reception during opening hours and a member of staff will be happy to take care of your request.
SPRINZ sanitary building
Haldenstraße 1
88287 Grünkraut
Opening hours Sanitary spare parts:
Mon-Thu 08:00-12:00 / 13:00-16:00
Fri 08:00-12:00
You can find an overview of our profiles in the associated
Spare parts flyerYou can find an overview of our profiles in the associated
Spare parts flyerYou can find an overview of our seals in the associated
Spare parts flyerFor goods with a net value of less than 25 euros, we charge 8.50 euros for packaging and shipping.
There are no additional costs for goods worth more than 25 euros net.
If your shower enclosure is suitable for flush-to-floor installation, the shower enclosure can be installed on a tiled shower area without a shower tray.
If you have high "watertightness" requirements, you should take this into account when choosing your shower enclosure.
Our showers meet the technical requirements for splash-proofing set out in DIN EN 14428. For the standardized watertightness test, the leakage of small amounts of water into the outside area of the shower, i.e. a few drops, is permissible. Depending on the profile geometry, shape of the shower tray, glass construction, installation situation and number and type of sealing profiles, more or less water will escape from the shower area. No shower is therefore 100% splash-proof! In principle, framed and partially framed showers have a higher level of splash water protection than frameless showers. To counteract this, SPRINZ also offers frameless showers with pendulum fittings and a raise/lower mechanism. When cleaning your showers, we also recommend always rinsing the glass from top to bottom and fitting existing profile strips during installation or not removing them afterwards.
This depends on your use and care. We only use high-quality materials for our products.
However, plastic sealing profiles, water-repellent strips and other components are subject to an ageing process. Please always replace these wearing parts when they no longer fulfill their function adequately.
Repairs due to wear and tear are not covered by the guarantee.
You can find some tips on caring for your shower in our care tips for glass showers.
Silicone is used for proper sealing and for the correct operation of your shower enclosure. After applying the silicone, the shower enclosure must not be used for 24 hours to allow the silicone to cure properly.
- Usually 3 weeks (without custom-made products, measurement and assembly)
- Usually 6-8 weeks (with measurement and installation)
QUESTIONS FROM THE INTERIOR SECTOR
You can find a selection of hinges and accessories for your glass door here.
We recommend the installation of 3-part hinges, as they guarantee long-lasting stability and tilt resistance.
You can find a selection of handle shells and push handles for your sliding door here.
Our flush-mounted Giffmuschel 157 recessed into the glass ensures that the entire passage width can be used.
You can find a selection of lock cases and handles for your glass door here.
Most hinged glass doors in the living area lead into rooms that are not locked. This is where our SK03 mini door lock is particularly useful, as it is just half the size of a conventional studio fitting.
m² - glass thickness (mm) - 2.5 kg = glass weight
- Motion 100 sliding door system = 100 kg
- Sliding door system Motion 200 Plus = 100 kg
- Sliding door system Motion 400 = 160 kg
- Sliding door system Motion 700 = 100 kg
- Sliding door system Motion 700 Plus: 1-leaf version = 120 kg / 2-leaf version = 150 kg
- Sliding door system Motion 700 Automatic = 80 kg
- Sliding door system Motion 800 = 50 kg
- Sliding door system Motion 1000 = 120 kg
- Sliding door system Motion 1200 = 40 kg