TWS 300
Exclusive cabins in drywall construction
Model overview
Type A
A1, up to 2,500 mm
A2, up to 2,500 mm
A3, up to 2,500 mm
A3, up to 2,500 mm
A5, up to 2,500 mm
A6, up to 2,500 mm
A7, up to 2,500 mm
A8, up to 2,500 mm
A1, fanlight up to 2,800 mm
A2, fanlight up to 2,800 mm
A3, fanlight up to 2.800 mm
A4, fanlight up to 2.800 mm
2,800 mm
A8, fanlight up to 2.800 mm
Type B
B1, up to 2,500 mm
B1, fanlight up to 2,800 mm
Type C
C1, up to 2,500 mm
C2, up to 2,500 mm
C3, up to 2,500 mm
C2, fanlight up to 2,800 mm
C3, fanlight up to 2,800 mm
Type D
D1
D2
Advantages at a glance
- Ceiling-high glass elements for completely enclosed rooms
- 23 mm door gap for supply air from extraction systems
- Glass elements available in almost any format in one piece in 10 mm thick toughened safety glass and 11 mm thick laminated safety glass made of 2 x toughened safety glass
- Profiles in matt chrome (EV1) from stock as standard
- End caps in light gray to match the profile
- Rubber sealing profile for quick installation
- No visible fixing due to screwed profile, pivot bearing integrated in the 23 mm wide and 60 mm high profile level
- Pivot point close to the edge of the glass provides optimum anti-trap protection.
- Extension options, urinal partitions and accessories such as toilet roll holder, spare toilet roll holder, toilet brush holder (all bright chrome-plated) and coat hooks with stop buffer (matt chrome) available
- Creative freedom thanks to ceramic screen printing (single or multi-colored), also with individual motifs
Technical details
Technical design
- 10 mm toughened safety glass made of float glass with full-surface high opacity screen printing according to RAL on the inside of the cubicle, polished edges
- Linear bearing in the aluminum profile 60 mm high at the bottom and top, 24 mm deep with rubber seal
- Externally flush-mounted point holders Ø 35 mm horizontal in locklevel
- WC rotary lock with locking from the inside, red/green field of vision on the inside and outside, emergency opening from the outside
- Floor clearance for door 25 mm
- Door pivot bearing concealed at the top and bottom in the U-profile
- Doors with glued profiles and height adjustment +/- 2 mm
- Doors opening inwards, Width of 600-900 mm possible
- Privacy seals on the inside of the door gap
- Aluminum profiles and fitting surface matt chrome (similar to E6/ EV1)
- Aluminum profiles with grey plastic end caps
Standard dimensions
- Clear room height up to 2.500 mm
- Clear room height 2,500-2.800 mm with fanlight at the door
- Door height 2,100 mm, door clearance 25 mm
Variable options without surcharge
- Doors opening outwards, max. opening angle 120° (opening restriction required)
Variable options with surcharge
- Doors opening inwards with self-closing (lift/lower bearing) concealed in the profile
- Doors opening outwards, max. 120° with overhead door closer (opening limiter)
- ESG 10 mm made of white glass with light colors, motifs or logo
- VSG 11 mm made of ESG 6 mm (float glass) with screen print facing the laminate + ESG 5 mm made of float glass with flush-mounted point holder
- VSG 11 mm made of ESG 6 mm (white glass) with screen print facing the laminate + ESG 5 mm made of white glass with flush-mounted point holder
- Glass on the inside with antibacterial glass coating SpriMedical®
- Holes for toilet roll holder for central cubicletoilet roll holder for central cubicle
- Clothes hook with stop buffer (see fold-down page)
Color overview ceramic screen printing
RAL 9010
RAL 9016
RAL 9005
RAL 9011
RAL 9017
More colors...
... can be ordered freely according to the RAL CLASSIC color system. Sampling is mandatory (subject to a charge).
Coat hooks with bumpers
The coat hook with bumper is available as a practical accessory. Thanks to the hanging pin, it can be used in a variety of ways, for example as a bag holder or jacket hanger.
The coat hook can be mounted in either one or both directions and can also be glued or attached to a tiled wall. The numerous customization options make the product an indispensable assistant.
